Horizontal Multistage Ring Sectional Centrifugal Process Pump D25-50X7 for Mining Sewage Water
Description
A centrifugal pump works by creating a centrifugal force to move liquid through the pump, increasing the liquid’s pressure as it moves from suction through the discharge end. A multi-stage centrifugal pump contains two or more impellers in the same pump unit. Ring section pumps, which are a type of multistage centrifugal pump, have multiple stages arranged in tandem inside their casings. As the liquid passes through each stage, the pressure of the liquid increases. This is especially useful for certain applications, including boiler feed systems, municipal fire suppression (think high-rise building sprinklers, for example), amine sour natural gas treatment systems, and so many others.
The D series Multistage Ring Section Centrifugal Process Pump is a utility-grade, high-pressure, ring section pump with heavy duty, segmental ring, diffuser design.
The pumps in a mineral processing concentrator (plant) can roughly be classified into two groups, Process pumps and Service pumps. A Service pump is any pump that provides a service to the process. A Process pump is one whose function is part of the process. The pump doing this type of job will be directly responsible for maintaining the continuous operation of the process.
These two different groups will be required to work in a variety of environments and handle various substances. This means their design and construction must change to compensate for adverse operating conditions. This could be anything from pumping Acidic or abrasive material to having to work underwater. Many of the design modifications will be limited to the material that the pump is constructed from. Such is the case in the pumping requirements of acidic chemicals and abrasive ores.
Structure Design
Horizontal, radially split, ring section pump with radial impellers, single or double flow entry, multistage. The stages are sealed against each other by O rings or by metallic sealing faces and fastened by tie bolts.
High operating reliability
* Axial thrust balancing by balance disc.
* Adaptation of pump casing to rotor deflection line.
Ease of service
* Easy maintenance of wear parts (bearings, seal elements, balancing devices).
* Metal-to-metal sealing of casing.
Long service life
* Avoidance of cavitation erosion inside the pump through hydraulically optimised inlet.
* Variant straight shaft design featuring increased operation safety.
Reduced energy costs
* No pre-warming of pump required.
* More than 100 impeller/diffuser combinations with optimum efficiencies possible.
Parameters of Multistage Centrifugal Process Pump
| Flow Capacity | 15-28 m3/h | Delivery Head | 144-618 m |
| Inlet/Outlet Dia. | DN80/DN80 mm | Working Pressure | ≤ 9.27 MPa |
| Liquid Temperature | 0 - 80 ℃ | Driven By | Electric Motor / Diesel Engine |
| Seal Type | Mechanical seal / Gland packing | Liquid | Water or similar |
| Material of Construction | Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205 |
Main Parts Configuration
The centrifugal process pump could be applied to transfer different kinds of liquid by customized wet parts, here followed our recommendation of main configuration:
| Parts Name | Clean Water | Sewage | Hot Water | Corrosive Liquid | Oil Liquid |
| Pump Body | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Shaft | Cast Iron | S.S420 | S.S420/42CrMo | S.S630 | S.S420/40Cr |
| Shaft Sleeve | Carbon Steel | S.S420 | S.S304 | S.S316/S.S630/S.S2205 | S.S304/S.S316 |
| Impeller | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Wearing Ring | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Bearing | China Make/NSK/SKF/Customized |
| Seals | Mechanical Seals/Gland Packing Seals |
Product Tags:
|
|
Diesel Engine Dirven 15-28m3/H Centrifugal Process Pump Multi Stage 440V 460V Images
|
